Drag Finisher Tooling Fixtures.....

One of the most important aspects of proper edge-prep and polishing of cutting tools in the drag finishing process is proper tooling to hold the tools to be processed. Certain factors, such as angle of presentation into the process media, direction of tools during the process, number of tools and the geometry of those tools play an important role in the overall desired results. Bel Air can provide custom holders and collets to fit your particular application.

Tool Holders 3rd Axis, Free Wheeling

Free wheeling angular tool holders are the simplest and most economical version for use with symmetrical cutting tools. The units include sealed bearings as well as an additional seal to ensure maximum wear and life. Bel Air can provide assembled replacement sections, or standard off-the-shelf bearings can be replaced easily, making maintenance a quick & easy process. These holders can accept any of Bel Air's standard line of chucks and collets.

Specifications
Fits Models
Model
Tools
Dia
500
1000
2000
3000
FMDF 0500-TH-200
4
6" /15cm
FMDF 0500-TH-201
6
6" / 15cm
FMDF 0500-TH-203
10
10" / 25cm
FMDF 000-TH-201 6 6" / 15cm    
FMDF 3000-TH-203 10 10" / 25cm    

Tool Holders 3rd Axis, Driven

These driven 3rd axis tool holders are designed to provide a faster process time cycle due to the additional "G-Forces" that can be obtained. These holders are easy to install and replacement parts are in-stock, and are designed for use with our Bayonet style of collets. See below for collet information.

Specifications
Fits Models
Model
Tools
Dia
500
1000
2000
3000
FMDF 0500-TH-302
4
6" /15cm
FMDF 0500-TH-301
6
6" / 15cm
FMDF 000-TH-300
10
10" / 25cm
FMDF 000-TH-303 6 10"" / 25cm    

Tool Collets- Standard

Our Standard Collets are for use with the free-wheeling tool holders. The tool is held in place by a simple hex-head screw against the tool shank. The collet is fastened to the tool by a button head screw through the bearing inner race. Brass sleeves are available, in increments, to minimize the number of collets required.

Tool Collets - Standard
Model
Shank Range
Fits Models
FMDF-000-TH-202-1
.81" - 1.02" (13/16" - 1-1/32")
ALL
FMDF-000-TH-202-2
.50" - .81" (1/2" - 13/16")
ALL
FMDF-000-TH-202-3
.030" - .50" (1/32" - 1/2")
ALL
Collet Sleeves, Brass
Specify
Specify

Tool Collets- Bayonet, Quick Change

This range of collets are designed for use with our driven tool holders. The tool is held in place by a simple hex head screw against the tool shank, and the collet is mounted to the tool holder by a push and twist bayonet type action.

Tool Collets - Bayonet Style - use with Drive Holders
Model
Shank Range
Fits Models
FMDF-000-THB-202-1
.81" - 1.02" (13/16" - 1-1/32")
ALL
FMDF-000-THB-202-2
.50" - .81" (1/2" - 13/16" )
ALL
FMDF-000-THB-202-3
.030" - .50" (1/32" - 1/2" )
ALL
Collet Sleeves, Brass
Specify
Specify

Tool Collets- Quick Chuck Style

Quick Chuck

This standard range of collets are designed for use with our tool holders. The tool is held in place by a three jaw quick chuck against the tool shank, and the collet is mounted to the tool holder by a set screw against the collet shank.

Quick Chuck - Bayonet Style This "Bayonet Mount" range of collets are designed for use with our bayonet style tool holders. The tool is held in place by a three jaw quick chuck against the tool shank, and the collet is mounted to the tool holder by a bayonet style, push and turn system for quick mounting.
Tool Collets -Quick Change Chuck Style
Model
Shank Range
Fits Models
FMDF-000-THC-202-1
1/16" - 1/2"
ALL
FMDF-000-THC-202-2
1/16" - 1/2"
ALL